Skip to content

Ideal transformer ratio ​

Open in simulator →

An ideal 5:1 transformer steps 120 V down to 24 V into a 10 Ω load, and the currents step up by the same ratio.

A 120 V rms, 60 Hz source drives the primary of an ideal transformer with turns ratio n=5. The secondary feeds a 10 Ω resistor. The primary voltage vp is exactly five times the secondary voltage vs, and the primary current ip is one fifth of the secondary current is.

The ideal transformer enforces two relations and nothing else: vp=nvs and ip=−is/n. It has no winding resistance, no leakage reactance and no magnetizing branch, so it passes DC as happily as AC and transfers power with no loss.

With n=5, the 120 V rms primary (169.7 V peak) gives 24 V rms (33.9 V peak) on the secondary. The 10 Ω load then draws 2.4 A rms from the secondary, and the primary supplies 0.48 A: the same 57.6 W on both sides. The simulated peak ratio vp/vs is 5.000, and the current ratio is 5.000 the other way.

Both windings need a ground reference. The source's return and the bottom of each winding are grounded here; an isolated secondary with no reference would leave its node voltages undefined.

The plot shows vp and vs on the top axis and the winding currents ip and is below.

Things to try ​

  • Change turns_ratio to 0.5 and the transformer steps up: 240 V across the load.
  • Replace the source with a DC source. The ideal transformer passes it unchanged, which a real transformer, whose magnetizing inductance shorts DC, cannot do. The transformer energization sample shows the real behaviour.

The run is 50 ms at a 20 µs step.